SEISMOLOGY AND GEOLOGY ›› 2013, Vol. 35 ›› Issue (3): 461-471.DOI: 10.3969/j.issn.0253-4967.2013.03.001

• CONTENTS • Previous Articles     Next Articles

FEATURES OF SEISMOGENIC PROCESS OF THE LONGMENSHAN FAULT ZONE DERIVED FROM ANALYSIS ON THE TEMPORAL-SPATIAL EVOLUTION OF EARTHQUAKES

MA Jin1, LIU Pei-xun1, LIU Yuan-zheng1,2   

  1. 1. State Key Laboratory of Earthquake Dynamics, Institute of Geology, China Earthquake Administration, Beijing 100029, China;
    2. North China University of Water Resources and Electric Power, Zhengzhou 450045, China
  • Received:2013-07-24 Revised:2013-09-09 Online:2013-09-30 Published:2013-10-12

地震活动时空演化中看到的龙门山断裂带地震孕育的几个现象

马瑾1, 刘培洵1, 刘远征1,2   

  1. 1. 中国地震局地质研究所, 地震动力学国家重点实验室, 北京 100029;
    2. 华北水利水电大学资源与环境学院, 郑州 450045
  • 作者简介:马瑾,女,1934年生,中国科学院院士,研究员,现主要研究与地震成因机理有关的构造物理问题,电话:010-62009122,E-mail:majin@ies.ac.cn。
  • 基金资助:

    国家自然科学基金(41172180,41274187)资助

Abstract:

Within almost five years,the 2008 Wenchuan MS 8.0 and 2013 Lushan MS 7.0 earthquakes ruptured the Longmenshan Fault zone successively. The characteristics of earthquakes and their development tendency on this fault zone have been a focus of subject of research. This article attempts to explore some features of seismic preparation process of the 2008 Wenchuan event from temporal-spatial evolution of earthquakes along the Longmenshan Fault zone during more than 40 years.(1)The spatial range of the earthquake preparation,or seismic nucleation,is much smaller than that of co-seismic rupturing. It indicates that the seismic source,probably consisting of some small asperities or barriers,prepared on a finite fault segment can be connected and expand into a large-scale rupture section along the fault when the fast instability occurs at the source.(2)Prior to the 2008 Wenchuan giant shock,its preparation area had experienced a dense distribution of small earthquakes for eight years or more,while no conspicuous slip and deformation were observed on the surface. This implies that the seismogenic fault segment of the Wenchuan event on the Longmenshan Fault was undergoing probably compressive deformation,accompanied with cataclastic process. When the cataclastic deformation of the great-shock source reached a critical state,fault instability occurred along the fault with rapid rupturing. (3)To further study the variations of the main-shock area prior to the event,this article analyzes the temporal-spatial processes of small earthquakes around the main shock since 2004 recorded by a special seismic network in the Zipingpu reservoir. The results indicate that the scope of the seismicity expanding along the fault took place along the fault in October 2005 and October 2006,respectively,in accordance with the time when the reservoir reached its high water level. Among them,the second expanding from October 2006 covered a relatively large area and with relatively big magnitudes,implying great importance for the study of the final instability process of the 2008 Wenchuan huge earthquake. Besides,this paper discusses the correlation of the rupturing process of the 2008 Wenchuan giant event with the geometry of the fault and the reason why the 2013 Lushan earthquake occurred many years after the Wenchuan event rather than immediately following this giant shock like usual big aftershocks. The research results are helpful for understanding of seismogenic processes of major earthquakes of the thrust type.

Key words: Longmenshan Fault zone, Wenchuan MS8 earthquake, Lushan MS7 earthquake, seismogenic process

摘要:

龙门山断裂带在先后5年中发生了2008年汶川MS 8强震和2013芦山MS 7强震。研究龙门山断裂的地震活动特点,分析地震发展形势成为人们关注的焦点。文中从龙门山断裂带40多年的地震时空演化出发探讨了汶川地震孕育过程中的几个现象: 1)孕震范围远小于发震范围,说明在有限断层段上孕育的地震在快速失稳过程中可以连接和扩展成规模很大的失稳断层; 2)汶川地震前孕震区小震密集,持续了8年以上,而无明显错动和变形,意味着汶川断层段可能经历了强烈的碎裂方式的挤压应变,在碎裂达到一定程度后失稳; 3)为进一步了解震前主震区附近的变化,研究了紫坪铺水库专用台网记录的2004年以来主震附近区域的小震活动的时空过程。结果显示,震前主震附近区域的地震活动曾在2005年10月和2006年10月发生过2次沿断层走向的扩展,扩展时间恰巧与紫坪铺水库2次高水位相呼应。其中,2006年10月地震活动的扩展范围大,震级高。这对说明汶川地震最后的失稳过程十分重要。此外,文中还讨论了汶川地震的发生过程与断层几何相关以及芦山地震没有直接发生在汶川地震后,而是发生在多年后的可能原因。研究结果有助于认识逆断层型强震孕育过程。

关键词: 龙门山断裂带, 汶川地震, 芦山地震, 孕震过程

CLC Number: