地震地质 ›› 2026, Vol. 48 ›› Issue (5): 1479-1496.DOI: 10.3969/j.issn.0253-4967.20260035

• 研究论文 • 上一篇    下一篇

基于密集台阵F-J方法的京西北平原区浅部速度结构特征

田建慧1)(), 赵帅1),2),*(), 郭文斌3), 李大虎4,5), 李占飞6)   

  1. 1) 北京市地震局, 北京 100081
    2) 中国地质大学(北京), 北京 100083
    3) 南方科技大学地球与空间科学系, 深圳 518055
    4) 四川省地震局, 成都 610039
    5) 中国地震局成都青藏高原地震研究所, 成都 610039
    6) 应急管理部国家自然灾害防治研究院, 北京 100085
  • 收稿日期:2026-03-13 修回日期:2026-06-11 出版日期:2026-11-11 发布日期:2026-11-11
  • 通讯作者: 赵帅
  • 作者简介:

    田建慧, 女, 1994年生, 2024年于中国地震局地球物理研究所获固体地球物理学专业博士学位, 工程师, 主要从事密集台阵探测与背景噪声反演工作, E-mail: 。

  • 基金资助:
    国家重点研发计划(2024YFC3012900); 地震科技星火计划青年项目(XH26001YB)

RESEARCH ON SHALLOW VELOCITY STRUCTURE CHARAC-TERISTICS OF THE NORTHWESTERN BEIJING PLAIN BASED ON THE DENSE ARRAY F-J METHOD

TIAN Jian-hui1)(), ZHAO Shuai1),2),*(), GUO Wen-bin3), LI Da-hu4,5), LI Zhan-fei6)   

  1. 1) Beijing Seismological Bureau, Beijing 100081, China
    2) China University of Geosciences(Beijing), Beijing 100083, China
    3) Southern University of Science and Technology, Shenzhen 518055, China
    4) Sichuan Earthquake Agency, Chengdu 610039, China
    5) Chengdu Institute of Tibetan plateau Seismology, China Earthquake Administration, Chengdu 610039, China
    6) National Institute of Natural Hazards, Beijing 100085, China
  • Received:2026-03-13 Revised:2026-06-11 Online:2026-11-11 Published:2026-11-11
  • Contact: ZHAO Shuai

摘要:

文中基于北京市海淀区苏家坨-温泉镇一带布设的密集台阵, 采用频率-贝塞尔变换法(F-J方法)提取基阶与一阶瑞利面波频散曲线, 通过子台阵划分与多模式面波联合反演, 获得了研究区0~400m深度范围的三维S波速度结构。结果表明, 研究区S波速度呈现南西高、北东低的空间格局, 与沉积层厚度呈明显负相关。 其中南西部山前洪积扇区介质密实、速度偏高, 北东部盆地延伸区介质松散、速度偏低, 苏家坨南部存在古河道或富水砂层控制的局部低速异常。垂向剖面揭示了三层式速度结构(表层低速松散层、中层过渡半固结层、深层高速基岩层), 并在多条剖面上识别出速度等值线错断、扭曲、下凹及低速体发育等特征, 指示存在隐伏断裂构造。文中研究证实, 密集台阵与F-J高阶面波联合反演技术在城市复杂浅地表条件下具有高精度成像能力, 可为城市断层探测、地震灾害风险评估及地下空间规划提供重要科学依据。

关键词: 频率-贝塞尔变换法, 高阶面波频散, S波速度结构, 隐伏断裂

Abstract:

The Sujiatuo-Wenquanzhen area in Haidian District, Beijing, is located in the transitional zone between the Jingxi Northwest Plain and the Xishan Piedmont, characterized by intense tectonic activity. However, due to densely distributed surface structures and complex geological conditions in this area, conventional geophysical methods struggle to achieve high-resolution shallow subsurface imaging. Therefore, this study aims to develop a high-precision imaging method suitable for complex urban environments and to reveal the spatial distribution characteristics of buried faults.
Based on an ultra-dense array deployed in the Sujiatuo-Wenquan area of Haidian District, Beijing, this study employs the Frequency-Bessel transform method(F-J method) to extract the fundamental-mode and first higher-mode Rayleigh wave dispersion curves. Through subarray division and multi-mode surface wave joint inversion, a high-resolution 3D S-wave velocity structure at depths of 0-400m beneath the study area is obtained.
The S-wave velocity in the study area exhibits significant spatial zoning and vertical velocity differentiation features. The overall velocity pattern exhibits higher velocities in the southwest and lower velocities in the northeast, showing a significant negative correlation with sedimentary thickness. Specifically, in the southwestern part of the study area, which corresponds to the piedmont alluvial fan zone, in which the sediment layer is thin and the subsurface medium is relatively dense and compact, resulting in relatively higher S-wave velocities. In contrast, in the northeastern part of the study area, which corresponds to the basin depocenter, the sediment layer is thick and the subsurface medium is relatively loose and unconsolidated, resulting in relatively low S-wave velocities. Additionally, a localized low-velocity anomaly is identified in the southern part of Sujiatuo, which is likely controlled by a paleochannel or a water-rich sand layer.
In the vertical direction, the depth range of 0 to 400m clearly reveals a three-layer velocity structure beneath the study area. The shallowest layer(0-80m) is characterized by low velocities and consists of unconsolidated loose sediments. The middle layer(80-200m) is characterized by transitional velocities and consists of semi-consolidated sediments. The deepest layer(200-400m) is characterized by relatively high velocities and is composed of consolidated bedrock.
The deepest layer, from 200 to 400m depth, is characterized by high velocities and corresponds to the bedrock layer. More importantly, on multiple vertical cross-sections, we have identified velocity anomaly features that are clearly controlled by fault structures. These features primarily manifest as offsets, warping, and sagging of velocity contours, as well as the development of localized low-velocity bodies. These observations collectively indicate the presence of buried fault structures within the study area.
In summary, the integration of a dense array with the multi-mode surface wave joint inversion technique can effectively overcome the imaging limitations imposed by complex shallow subsurface conditions in urban environments and break through the technical bottleneck of traditional surface wave methods, which insufficiently utilize higher-mode information. The good agreement between the imaging results and borehole as well as sediment thickness data validates the applicability and reliability of this technique for fine-scale shallow urban exploration. This approach can provide an important scientific basis for active fault detection, spatial localization of buried faults, and seismic hazard assessment in urban areas.

Key words: Frequency-Bessel transform method, high-order surface wave dispersion, S-wave velocity structure, buried fault